Month: January 2018

Shower Repair Services

Gone are the days when showers used to be just a means of taking a bath. Nowadays showers have become a lifestyle and not just a lifestyle but a therapeutic and a relaxation session; something you want to run to every single day. You no longer have to persevere cold showers due to lack of better options; with the wide range of options available in the market showering becomes something to look forward to especially after a busy and hectic day. There are very many options available today at your disposal, some of these amazing options are sophisticated showerheads, spa-like water jets; we also have faucet designs and steam
systems. All these come with water and electricity saving features; meaning you do not have to worry about sinking into huge water and electricity bills. The modern day showers are also very shower repair friendly because these shower parts are easily and readily available.

 

To avoid having your comfort interrupted or even cut short, shower servicing and shower repairs have to be carried out as promptly and often as possible in order to avoid further damages after a leaking shower that would cost you so much or even pose as safety risk. On instances where your shower malfunctions or breaks down which is a common occurrence, especially as a result of power surge or just pure malfunction of the system, we highly recommend you have it repaired by an Elite Shower Repairs expert.
Dealing with shower experts reduces the chances of having recurrent issues that can only make you spend so much in the end and at the same time exposing you to so much electrical related accidents.

Reasons for shower repairs:

• Water pressure issues 
  In not so common situations where you encounter problems with the water pressure thus interfering with the water temperature, we highly
  recommend this shower repair for best results. You do not want to have shower
  sessions where you have to wait for a whole 10 minutes just for the water to
  get warm!

 

• Faucet leakage 
  These are really very important especially if dripping has been
  noticed as a result of worn out rubber washers. In this kind of scenario all is
  required is to just replace the washer immediately in order to curb water wastage and you are good to go.

 

• Leaking pipes and fixtures 
  Leaking pipes will not only be an eye soar but also will make your water bill cost you an arm and a leg. Fixing leaky pipes and shower fixtures will save you a lot, giving you peace of mind.

 

• Clogged drains 
  Just who wants to take a shower in a bathroom that just won’t drain? I bet you don’t too. The foul smell that comes with is something that no one wants to have to deal with. This is why you always have to ensure your shower drain is unclogged as often as possible to even avoid contamination with bacteria as a result of poor drainage.

 

• Power connections issues 
  This is something you should not gamble with, ensure you get in touch with shower experts who can do proper power connections for you and in the right way. Well, no one ever wants to get electrocuted while taking a shower.

 

• Shower heads repairs
  It is advisable to carry out this shower repair procedure every now and then in order to remove mineral deposits from the shower head. This helps
  your shower function well, making your shower sessions something to look
  forward to every single day. See more bathroom repair options.

Bathroom Leak Repair Fixed With Ease

 

How might you portray a dribbling shower head-annoying, grinding or excruciatingly agonizing? The steady dribble has the wonderful energetic promptness to drive one up the wall before long. Yet, what most mortgage holders are not comfortable with is the way that this commonplace leak in the bathroom can cause a serious deplete on your assets and accounts.

 

A spic and span washer from a handyman shop close to your home, a screwdriver and a customizable torque are your devices for the bathroom leak repair, to fix the leaking shower head. We still recommend you can in touch with the Elite Shower Repair team to have a look.

 

Handle the Leak on A Footing

 

So you trust that as opposed to covering your head in the sand in obvious ostrich form, the need of great importance is to dive fast into this entirely obstinate circumstance? All things considered, your alarm can be weakened to a significant degree on the off chance that you comprehend the main driver of the issue.

 

The leak could happen either at the point where the pipe and the leaking shower head meet, or an obstructed shower head might be the antagonist of the piece.

 

In any case, if the leak holds on, you may need to unscrew the head, and screw it back or contact Elite Shower Repairs.

 

 

What remains is to appreciate the hush of discharge (read: dribble less) isolations. There are two regions where the tile ought to be introduced with a 5-degree slant. The primary territory is the seat (if relevant) that the arrival board glass sits on. The arrival board is normally where the shower head is specifically pointed. On the off chance that your walled in area includes a seat, water will normally pool up as it sprinkles off the arrival board. If your tile work is done effectively, you shouldn’t have any significant issues. Poor tile work however can without much of a stretch be abused by sitting water leaking through grout joints. To keep water from pooling up on the seat, ensure the seat tile is tenderly slanted over into the shower at around 5 degrees.

 

The second zone that water can abuse if not appropriately developed is the ledge or control. The ledge is normally a solitary bit of marble that traverses the opening of the shower along the base. It normally sits a couple of crawls off the ground and is the limit you advance over each time you get in and out of the shower.

 

As water hits the entryway or inline board it moves down the glass. The entryway clear has an inclined blade that aides the water far from the entryway. Moving off the breadth blade, the water hits the ledge. A shower entryway ledge that is appropriately developed will be inclined roughly 5 degrees with the goal that water moves off the entryway, off the compass balance, down the ledge, and once again into the shower.

 

On the off chance that the ledge isn’t slanted, water will gather and weight from the falling dampness above will gradually drive it to discover an exit around the entryway. Indeed, even the littlest holes in the walled in area are sufficiently expansive for water to discover out and into the encompassing bathroom. The measure of water getting away on a for every utilization premise may not be extremely detectable. After some time however, the ceaseless nearness of water outside the shower can prompt perceptible harm on wood and different surfaces.

 

You ought to be particularly cautious with fiberglass shower container. While there is no issue introducing a frame-less shower entryway in a tiled opening that uses a fiberglass skillet as the base, the online specs for these items don’t specify whether the ledge is inclined by any means. If not slanted, water can possibly gather and increment the leakage of your frame-less shower.

What to do when my shower leaks?

A leaking shower can be irritating, as well as expensive. Other than annoying drip, drip, a leaky shower can waste; can waste many water gallons every week. And more badly, if leaking is in hot water, it can lead to wastage of significant amount of energy because the water heater does not stop warming the water which is being drawn unnecessarily. In case the shower is leaking, is a sign that there is a part which is worn out and needs to be replaced. Shower leaking may be for various reasons:

• Loose nuts, if the shower is leaking near packing area, or maybe at the handle base, that may be as results of loosened nuts.
• Shower washers may have been worn out. If washers are too old, this may lead to shower leaking.
• Poor quality washers may also be the cause of shower leaking.
• Inappropriate installed washers.
• If the washers in place are of wrong size.
• If the disc, ball faucets and cartridge their O-rings have worn out may be the leaking reason.
• When disc faucets inlets and outlets seals wears may lead to shower leaking.
• Disc faucets may leak when sediments build up within the faucet inlet.
• When the O-ring cushioning cartridge breaks cartridge faucets may start leaking.
• Inlet seals may wear out and start leaking when O-ring breaks or wear out.

The lists of the reasons which may lead to shower leaking are endless. But the above-listed causes of a leaking shower can be managed and the various parts which have worn out replaced or repair of the braked parts of the shower.

 

Don’t ignore the signs of a leaking shower

Most people don’t bother paying attention to the shower faucet handle when has been installed first. As its used minerals deposit found in water especially if you are using hard water can build up and cause the faucet to get stuck. When it becomes hard to use, people will either start twisting, pulling or pushing harder so that to make it work. This force may lead to internal leaks, damage floor as well as walls, or lead to breaking the handle thus making it useless.

Repair the Shower

If the areas which have been broken can be repaired, find a qualified and experienced technician to fix them. This will reduce the expense which you may incur purchasing the brand new.

Fixing loose nuts and other parts. Make sure all loose nuts and other parts of the shower are tightly fixed, that the shower stops leaking.

As you use the shower, make sure you follow the manual guide correctly so as to give your shower a long life long span. Make sure you regularly service the shower and fix all loosening nuts to avoid shower leakage.

See more services: Bathroom waterproofing Brisbane & Regroup Shower Tiles